请教一下各位，用饱和度场初始化的时候，读到schedule时，dos窗口就停在那里了，只有几个警告消息，但都是关于插值收敛的问题。把PVT和SCAL部分导入其他模型用饱和度场初始化的时候却可以，这是什么原因啊，有知道的告诉一下吧，谢谢了.
PRT后面的部分如下： 1041 READING ECHO
1042 READING SWOF
1043 READING SGOF
END OF INCLUDE FILE
1044 READING REGIONS
@--WARNING AT TIME 0.0 DAYS ( 1-JLY-2003):
@ DISPERSION HAS BEEN TURNED ON IN THE RUNSPEC
@ SECTION BUT THERE ARE NO TRDIS KEYWORDS IN THE
@ PROPS SECTION.
@--WARNING AT TIME 0.0 DAYS ( 1-JLY-2003):
@ DISPERSION HAS BEEN TURNED ON IN THE RUNSPEC
@ SECTION BUT THERE IS NO DISPERSE KEYWORD IN THE
@ PROPS SECTION.
@--WARNING AT TIME 0.0 DAYS ( 1-JLY-2003):
@ UNPHYSICAL VALUE -56.9452 FOR GAS FVF FOUND
@ IN GAS PRESSURE TABLE 1
@ AT SAMPLE PRESSURE 0.00000
@ DUE TO EXTRAPOLATION ABOVE THE MAXIMUM
@ ENTERED DEW POINT PRESSURE 250.0000
@--WARNING AT TIME 0.0 DAYS ( 1-JLY-2003):
@ NEGATIVE COMPRESSIBILITY FOUND IN GAS
@ PRESSURE TABLE 1 AND OIL PRESSURE
@ TABLE 1 AT A SAMPLE PRESSURE VALUE
@ 0.00000 . ADJUST SATURATED FLUID
@ PROPERTY VALUES AT THIS PRESSURE.
@ NEGATIVE COMPRESSIBILITIES OCCUR
@ FOR ALL GAS SATURATION VALUES
@--WARNING AT TIME 0.0 DAYS ( 1-JLY-2003):
@ THE PROCESSED PVTO DATA FOR TABLE 1
@ HAS UNDERSATURATED BO LINES THAT WILL INTERSECT
@ IF EXTRAPOLATED
@ AT RS VALUES OF 84.0000 SM3/SM3 AND 100.0000 SM3/SM3
@ AND A PRESSURE OF 167.57 BARSA
@--WARNING AT TIME 0.0 DAYS ( 1-JLY-2003):
@ THE PROCESSED PVTO DATA FOR TABLE 1
@ HAS UNDERSATURATED BO LINES THAT WILL INTERSECT
@ IF EXTRAPOLATED
@ AT RS VALUES OF 70.0000 SM3/SM3 AND 84.0000 SM3/SM3
@ AND A PRESSURE OF 135.35 BARSA
@--WARNING AT TIME 0.0 DAYS ( 1-JLY-2003):
@ THE PROCESSED PVTO DATA FOR TABLE 1
@ HAS UNDERSATURATED BO LINES THAT WILL INTERSECT
@ IF EXTRAPOLATED
@ AT RS VALUES OF 55.9000 SM3/SM3 AND 70.0000 SM3/SM3
@ AND A PRESSURE OF 115.66 BARSA
@--WARNING AT TIME 0.0 DAYS ( 1-JLY-2003):
@ THE PROCESSED PVTO DATA FOR TABLE 1
@ HAS UNDERSATURATED BO LINES THAT WILL INTERSECT
@ IF EXTRAPOLATED
@ AT RS VALUES OF 32.6000 SM3/SM3 AND 41.3000 SM3/SM3
@ AND A PRESSURE OF 68.24 BARSA
1045 READING INCLUDE cq_reg.inc
END OF INCLUDE FILE
1046 READING SOLUTION
1047 READING INCLUDE cq_init.inc
1048 READING ECHO
1049 READING PRVD
1050 READING ECHO
1051 READING SGAS
1052 READING RS
1053 READING SWAT
1054 READING ECHO
1055 READING RPTRST
1056 READING RPTSOL
END OF INCLUDE FILE
1057 READING SCHEDULE
DOS窗口就一直停在这个地方了
